RENDER



ICONIC Wet Patch 10LT
Formulated for difficult substrates as main key coat. The strongest grip strength in the range.Uses:
-Blueboard coat and joins.
Addition of 5-10% of cement is added to active product prior to use, which help cure and set quicker. Coverage 6-8 m2 per bucket.
ICONIC Dry Patch
Dry Render Patch for base coats. Strong adhesive dry render patch stick to most substrates.Uses:
-Blueboard joins
-Pre-coated Eps Panels joins and washers base coat.
Macrender Coarse
Coarse grade cementitious render for application to stable and porous masonry surfaces.Macrender Coarse FR
Coarse grade fibre-reinforced cementitious render for application to aerated concrete blocks & panels.Coharo Patch
Coharo Coatings – Patch / Prep. / Primer – 12L-Patch/Primer for joins on precoat panels
and blue-board sheets.
Coharo Levelling Coat
-Extreme Highbuild-Lightweight Base Coat
- 6 mm to 50 mm in one pass
-High polymer
-Insulative, strong and flexible
-Outstanding workability, zero sag
-Adheres to multiple substrates
Coharo APAH
Coharo Hi-Build is a cement base foam render for Brick, Block, and Foam this is an all in one type render.Unitex Redi-Render
Designed for application over clean brickwork and blockwork. It is available in both fine (Harbour Fine) and medium grades. Generally for skim coat work, it is applied in 2 passes – a build coat and then a final sponge finish. Coverage is 3-4.5 m2 per bagUnitex Base Board Rrender
Designed for application as a build coat for the Unitex Base Board™ and IB Board systems. Applied at minimum thickness of 5mm. A super lightweight product (8.5kg) and easy to use for most skill levelsUnitex Hilite-Render
Suitable for all high and very high-build applications over uneven surfaces. Can be applied over many substrates including Brickwork, Concrete slabs and Panels. It is ideal for multi-substrate application. Is able to achieve 30mm depth in 2-3 passes. A lightweight render, not adding excessive weight to the structure. Easy to use for all skill levels.Unitex Fast-R-Render
Designed for application over clean AAC Panels, brickwork and blockwork. It is available in medium grade and used for 1 coat application to thicknesses of skim coat to 10mm. Can be finished to a tight and smooth surface. Easy to use for all skill levels.Unitex Harbour Fine
Designed for application over clean brickwork and block work. It is available as a fine grade render for sponge finishing. Generally for skim coat work, it is applied in 2 passes – a build coat and then a final sponge finish. Coverage is 2-4.5 m2 per bag (depending on substrate and build thickness required).Show More